Thông tin sản phẩm Phosphoric acid 85%
Trạng thái : Lỏng
Màu sắc : không màu
Độ pH : < 0,5 ở 100 g/l(20 °C)
Độ nóng chảy: khoảng 21 °C
Độ sôi: Khoảng 158 °C ở 1.013 mbar
Khối lượng riêng: 1,71 g/cm3 ở 20 °C
Tính hòa tan : ở 20 °C hòa tan được
Quy cách đóng gói : chai nhựa 1 lít
Bảo quản: trên 15 °C
Thành phần của Phosphoric acid 85%
- H3PO4 ≥ 85.0 %
- Chloride (Cl) ≤ 2 ppm
- Fluoride (F) ≤ 1 ppm
- Nitrate (NO₃) ≤ 3 ppm
- Phosphite and Hypophosphite (như H₃PO₃) ≤ 20 ppm
- Kim loại nặng ( như Pb) ≤ 10 ppm
- Sulphate (SO₄) ≤ 20 ppm
- As (Arsenic) ≤ 0.5 ppm
- Ca (Calcium) ≤ 20 ppm
- Cd (Cadmium) ≤ 0.5 ppm
- Co (Cobalt) ≤ 0.5 ppm
- Cu (Copper) ≤ 0.5 ppm
- Fe (Iron) ≤ 10 ppm
Ứng dụng của Phosphoric acid 85%:
– Phosphoric acid 85% được sử dụng làm thuốc thử phân tích trong phòng thí nghiệm, chuẩn độ, điều chính pH, pha dung địch đệm photphat….
– Trong thực phẩm, đặc biệt trong công nghệ sản xuất đường, sản xuất hương vị trong nước ngọt.
– Trong công nghiệp, xử lý bề mặt kim loại, được ứng dụng rất phổ biến. Như một chất tẩy rửa, ức chế cáu căn rỉ sét, tẩy sạch dầu mỡ trên bề mặt kim loại, tẩy sạch dầu, sạch gỉ sét. Trong chế tác đồng, nhôm. Thủ công mỹ nghệ, dân dụng. Trong tiền xử lý sơn tĩnh điện, là tiền chất tạo ra muối kép dihydro phosphate, hay còn gọi là chất phosphate hóa, lớp phủ phosphate kẽm, chất tạo bề mặt trước khi sơn tĩnh điện, là tiền chất trong công nghệ tạo ra muối majep. Trong công nghệ tiền xử lý sơn, phosphate hóa được rất nhiều nhà sản xuất tạo ra hợp chất kẽm đihydro phosphate, tạo lớp màng màu xám lông chuột, mịn, tạo chân bám cho sơn, tạo độ đàn hồi cho lớp sơn tĩnh điện.
– Acid phosphoric 85%, dùng trong công nghệ đánh bóng điện hóa inox, có nhiều cách gọi khác nhau như: acid tẩy rửa, acid đánh bóng, acid điện hóa inox, chất điện hóa inox, … là nguyên liệu đặc biệt, chính và rất quan trọng trong quy trình đánh bóng điện hóa inox.
– Acid phosphoric được ứng dụng trong sản xuất sơn, công nghệ xây dựng mới,…
– Ứng dụng trong công nghệ sản xuất phân bón.
Đánh giá
Chưa có đánh giá nào.